Y806 Hammer Additives


Composition: Polysiloxane solution
Appearance: colourless transparent liquid
Active component: 18%
Application range: Soluble coatings
Recommended dosage: 0.05-0.5% of the total formulation
Usage: Add in the paint mixing stage.

Characteristics and advantages:

  • Y806 Hammer Additives is a special surface conditioner, which can make the aluminium powder pattern even, exquisite and strong three-dimensional sense. Due to its stable molecular chain structure, the pattern will not change significantly during storage.

Fill out the form, usually resumes in 20 minutes

    25kg non-recyclable blue iron drum.
    Before the product is completely empty, the inner and outer lids must be tightly closed after use.

    Keep away from heat and fire sources and store away from light.


    • Do not contaminate other products with Y806.
    • The pattern changes from coarse to fine as the amount of Y806 increases.
    • Different batches, materials and construction conditions may cause slight differences in the hammering paint. This feature is normal for all hammering agents and hammering paints, it is best to test spray each batch to adjust the uniformity of the pattern.

    The above information is based on the product. Due to differences in producer formulations, production processes and construction conditions, the above statements are for reference only.
    We do not accept any legal liability and would ask that you test the dosage before use.
    The Company reserves the right to make improvements to its own products and to make any changes to its specifications without prior notice.

    Additional information

    Weight N/A
    Dimensions N/A