BZ-6800A Defoamer Additives

$0.10$9.90

Composition: Silicone foam-breaking polymer
Appearance: Milky white liquid
Active content: 100%
Application: Solvent-based coatings; light-curing coatings, solvent-free coatings.
Recommended dosage: 0.1-1.0% of the total formulation (please test the most appropriate dosage before use)
Directions: To obtain adequate defoaming, it is recommended to add before grinding. If added afterwards, it should be mixed at a sufficiently high shear to ensure the defoaming effect.

Characteristics and advantages:

  • BZ-6800A Defoamer Additives has excellent defoaming, foam inhibition effect, can inhibit and eliminate the ink in the production, canning, construction process generated by the bubble, especially for high viscosity ink bubble elimination in a significant effect.
  • Used in epoxy system, it has good defoaming effect on the roll coating of epoxy.

Fill out the form, usually resumes in 20 minutes

    Package: 25KG non-recyclable blue drum.
    Before the product is completely empty, the lid must be tightened after use.

    Storage: Keep away from heat and light sources and keep away from light.

    Caution: Please carefully assess the effect on phase solubility and shrinkage before use.

    The above information is based on the product. Due to differences in producer formulations, production processes and construction conditions, the above statements are for reference only.
    We do not accept any legal liability and would ask that you test the dosage before use.
    The Company reserves the right to make improvements to its own products and to make any changes to its specifications without prior notice.

    Additional information

    Weight N/A
    Dimensions N/A
    Samples

    ,